1. Read the description and user manual.
2. Make sure that the mains voltage corresponds to the one specified in the device data sheet before using the appliance.
3. Do not use the appliance if the main cord, plug, indicators, or the appliance itself is visibly damaged, if the appliance has fallen or the tank is leaking. In this case, contact the nearest authorized service center to avoid danger.
4. Do not allow the cord touching the heated soleplate.
5. Do not touch any metal parts when the appliance is switched on. Avoid burns when working with a steam.
6. Make sure that the cord does not hang over the edge of table or work surface.
7. Never immerse the iron in water or other liquids to avoid electric shock. If this happens, do not use the device (see p. 3).
8. Keep the device out of the reach of children.
9. Do not leave the appliance unattended on an ironing board or when it is connected to a power supply.
10. Installation and use of device must be occurred on an even, stable and horizontal surface.
11. Do not use any accessories not recommended by the manufacturer, as this may result in damage to the appliance, as well as in loss of warranty.
12. Make sure that the surface on which the base stands is stable when installing the iron on a thermal insulation stand.
13. The drain cover must be tightly closed during use.
14. Do not fill the tank with hot water, scented water, fragrance, vinegar, starch, descaling agent, laundry softener, or other chemicals.
15. The appliance must be unplugged before cleaning.
16. Do not use the appliance for any other purpose.
17. This device can be used by children aged 8 years and older, as well as persons with reduced physical, sensory or mental abilities, lack of experience and knowledge, if they are supervised or if they are familiar with the instructions of device safe use, and they are aware of the possible dangers associated with this.
18. Use, cleaning and maintenance must not be performed by children without supervision.
19. Do not use outdoors.
20. For household use only.

1. Steam supply button
2. Temperature dial
3. Temperature indicator
4. Iron
5. Soleplate
6. Thermal insulation stand
7. Control Panel
8. Cord retainer
9. Main stand
10. Water tank handle
11. Water tank locker
12. Water filling hole
13. Water tank

The circular temperature dial on the iron allows you to select the desired soleplate temperature according to the type of ironed fabric (see «Basic tips» and «Additionally»).

When the iron soleplate is heated, the temperature indicator lights up. As soon as the iron reaches the selected temperature, the indicator turns off. The temperature indicator will turn on and off cyclically as the iron maintains the selected temperature during ironing.

Power button (ON/OFF)

Connect the device to the power supply and press the ON/OFF button. The device will enter the working order, at the same time the power indicator will light up. To turn off the device, press and hold the ON/OFF button for about 2 seconds.

Steam mode switch button

The device can be switched between «ECO» and «MAX» modes using the steam mode switch button. The «ECO» steam intensity mode is set by default when the device is turned on. Press the mode switch button to select the desired steam intensity.

Refill indicator

If there is not enough water in the tank, the indicator will light up. Then two beeps will sound and the steam station will stop supplying the steam. It is a signal that you need to add water to the tank. To do this, remove the water tank and fill it with water through the water filling hole, making sure that the water level is between the «MIN» and «MAX» marks. Then insert the water tank back in.

Descaling indicator

If the descaling indicator is lighting, it means that the steam station needs to be cleaned of scale and mineral residues. You must perform descaling following the instructions described in  «Cleaning and maintenance» section. After descaling is complete, restart the appliance and then press the «OK» button. The descaling indicator will turn off and the appliance will be ready to use again.

Filling the removable tank with water

Grasp the water tank handle and lift the release button up to pull out the water tank. Then fill the tank with water through the water filling hole. Make sure that the water level is between the «MIN» and «MAX» marks on the tank case.After filling the water tank, heat the iron to the maximum temperature, and then iron a damp cloth for a few minutes to remove any residues on the soleplate as described in the section «Steam ironing».

Dry ironing

1. Place the iron on the thermal insulation stand.
2. Connect the plug to the wall outlet, press the power button. A single beep will sound and the power indicator will light up. The temperature indicator on the soleplate will light up and the iron will start heating up.
3. Turn the temperature dial to select the desired mode depending on the fabric type (see «Basic tips» and «Additionally»).
4. When the soleplate temperature reaches the selected value, the temperature indicator will turn off and you can start ironing.

Steam ironing

1. Place the steam station on a stable and level surface.
2. Remove the water tank and fill it with water through the water filling hole. It is better to use purified water with the lowest content of calcium particles. The maximum capacity of the water tank is 1.7 l; the water level must be between the «MIN» and «MAX» marks. Insert the filled tank back according to the instructions.
3. Place the iron on the thermal insulation stand.
4. Connect the plug to the wall outlet, press the power button. A single beep will sound and the power indicator will light up. The «ECO» steam intensity mode is activated by default. The temperature indicator on the soleplate will light up and the iron starts heating up.
5. Turn the temperature dial to select the desired mode depending on the fabric type (see «Basic tips» and «Additionally»).
6. Once the desired mode is selected, the iron will begin to heat up. The temperature indicator will stop blinking after the selected temperature is reached.
7. Two modes of steam supply intensity («MAX» and «ECO») are available. You can choose the desired one according to the set temperature range, which depends on the fabric type to be ironed. Make sure that there is enough water in the tank to use them.
8. When the steam station is ready for operation, the indicator of the selected steam mode will stop blinking and will light constantly.
9. Press the steam button with a little force and the steam will be continuously sprayed from the soleplate. If you loosen the steam supply button, the appliance can be used for dry ironing without steam.
10. Press and hold the power button for about 2 seconds when finished. All indicators will turn off and the device as well. Unplug the steam station. The iron soleplate will remain hot; do not touch it with your hands. Place it on a thermal insulation stand until it cools completely.
11. nThe steam station can be used for vertical steaming. Set the soleplate heating to the maximum mode. Select the «MAX» steam mode. Place your clothes on the hanger, hold the iron upright, and hold down the steam control button to steam things in hanging position.

Automatic power off

The device will automatically turn off after 10 minutes if no steam is sprayed from the soleplate. To restart the device, press the ON/OFF button again.

Cord retainer

When the steam hose and power cord are not in use, they can be stored by fastening them with a retainer.

Correct iron placement on the thermal insulation stand

The iron must be properly placed on the thermal insulation stand when not in use.

Before cleaning, unplug the device and let it cool down.
1. Wipe off any residues on the soleplate with a damp cloth or a non-abrasive (liquid) cleaner.
2. Clean the top of the iron with a soft, damp cloth. Wipe the remaining water from the device stand and the thermal insulation stand with a dry cloth.
3. Remove the water tank.
4. Turn the main stand over and place it on a flat surface. Then turn the valve handle at the stand bottom counterclockwise to remove it (see figure below).
5. Drain the water from the internal boiler of the steam station.
6. Turn the steam station upside down again and fill the drain hole with clean water.
7. Take the steam station with both hands and shake it several times. Re-drain the water from the boiler and tighten the valve.
8. Return the steam station to its normal position and install the removable tank after filling it with clean water.
9. Set the soleplate heating to the minimum level.
10. nConnect the steam station to the power supply, turn it on and wait from 30 to 180 seconds. The steam station will start pumping water, then press the «OK» button and the scale indicator will turn off. If the refill indicator lights up, add water to the removable tank and repeat the steps described in point 10.
We recommend performing this procedure at least once a month or after using 10 liters of water to prevent damage to the device and achieve optimum productivity during use.If the appliance is not used for a long time, drain the water from the tank, turn the temperature dial to the minimum value, fasten the steam hose and power cord with the retainer, and then place the appliance out of the reach of children.

•     Always check if the product has a label with ironing instructions. In this case, follow these instructions for ironing your clothes.
•     The iron heats up faster than it cools down, so you should start ironing with items that require a lower temperature, such as items made of synthetic fiber.
•     If the fabric consists of different types of fibers, always choose the lowest temperature for ironing.
•     Silk and synthetic clothing should be ironed on the inside to avoid shine.•Velvet and other fabrics that quickly become shiny should be ironed in one direction with light force. Always keep the iron in the ironing movement direction.
•     100% wool fabrics can be ironed with a steam iron. Use a dry cloth as a pad, and then select the appropriate setting on the dial.
•     Never iron over a zipper sewn into the fabric. This will cause damage to the soleplate. It is necessary to iron around any such object.

1. Information about measures that should be taken when a technical device malfunction is detected: if you find that the steam station does not work properly, or if you want to make claims about the appliance quality, contact the company that you purchased the product from. In addition, information about Eisenhof technical support can be found on the official website eisenhof.ru or by email info@eisenhof.ru
2. The appliance is intended for household use.
3. Information about restrictions in the use of technical equipment, taking into account its purpose of use in residential, commercial or industrial areas: the equipment is intended for use in residential areas with low and medium power consumption, without exposure of harmful and dangerous factors. The equipment is intended for operation without the constant presence of a service person.
4. Protect from mechanical damage and other harmful exposure during transportation and storage. Repairs and restoration of device should be carried out in specialized workshops according to the warranty card. To avoid damage to the environment, it is necessary to separate this object from ordinary waste and dispose of it in the safest possible way, for example, to hand it over to special disposal sites.